Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Windscreen Wiper Motor

Model: Nissan Almera N16, MK 2 - Years 2000-2008
Part: Power window motor

To access the wiper motor mechanism, remove the plastic cover under the windscreen and the wiper arms. Then, remove the protective caps from the nuts securing the wiper arms and unscrew the nuts to remove the wipers. Next, proceed to remove the pressure clips and screws securing the plastic grille. At this point, you can access the complete motor mechanism and dismantle it by unscrewing the relevant securing pins. Then, extract the mechanism by disconnecting the power connector and insert the new one, reversing the installation process.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Wiper Control Lever
Replacement of Wiper Control Lever
Nissan Almera (2000-2008 / N16, MK 2) Remove the upper plastic trim; to avoid leaving marks, use a plastic tool to also remove the trim on the steering wheel side. Unscrew all the screws …
How to Change the Air Filter on a Nissan Almera
How to Change the Air Filter on a Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) If you need to replace the engine air filter on this vehicle, below you will find all the steps and necessary information for the replacement, and yo…
Where is the air conditioning relay located in the Nissan Almera?
Where is the air conditioning relay located in the Nissan Almera?
Nissan Almera (2000-2008 / N16, MK 2) In the event of a sudden failure of the air conditioning in your Nissan Almera, the first thing to do is check that the respective relay is functioni…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos