Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Wiper Control Lever

Model: Nissan Almera N16, MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Windshield wipers

See other generations:
Video tutorial

Remove the upper plastic trim; to avoid leaving marks, use a plastic tool to also remove the trim on the steering wheel side. Unscrew all the screws located under the trims using a screwdriver with an extension.

Unscrew the screws located under the dashboard by pulling up the glove compartment block. Remove the relevant plastic plugs and unscrew the screws located at the sides behind and below the plastic cover of the steering column.

Once all screws are removed, you can extract the complete wiper control block for replacement.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

Replacing the Timing Chain on the Nissan Almera
Replacing the Timing Chain on the Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) Here are the main instructions for replacing the timing chain on the Nissan Almera. First, open the bonnet of your car and start by removing the batt…
Guide to Replacing the Radio in the Nissan Almera
Guide to Replacing the Radio in the Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) Today, let's go through the instructions for removing and replacing the standard radio in the Nissan Almera in simple, quick steps. First, get in the…
Changing Brake Discs and Pads
Changing Brake Discs and Pads
Nissan Almera (2000-2008 / N16, MK 2) To change the brake pads, first lift the vehicle on a support and remove the wheel from the axle in question. Use a large screwdriver to push the pis…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos