|
Do it yourself
| |||
| ||||
How to reset the airbag light on a Nissan Qashqai
Model: Nissan Qashqai
J10
- Years 2006-2014
To reset the airbag light on a Nissan Qashqai, follow this procedure: first, turn on the ignition by switching the key to the on position. When the airbag light starts flashing, quickly turn off the ignition, then wait for 5 seconds. Repeat this procedure a total of 3 times. After completing this, turn on the ignition again, and when the airbag light starts flashing, wait for 30 seconds before turning off the ignition. Once the ignition is off, wait for 10 seconds. After these 10 seconds, turn the ignition back on. At this point, you can start the engine to check if the light goes out. The reset procedure is simple and will take approximately 2 minutes to complete.
Updated on 7 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Nissan Qashqai
(2006-2014 /
J10)
Today's instructions will allow us to reset the airbag malfunction warning light on the Nissan Qashqai in a few simple steps. First, it is necessary …
Nissan Qashqai
(2006-2014 /
J10)
In this video tutorial, you will see how to reset the airbag light on the Nissan Qashqai from 2006 to 2014. First, get into the vehicle and insert th…
Nissan Qashqai
(2006-2014 /
J10)
In today's tutorial, discover how to reset the airbag warning light that flashes on the instrument cluster of the Nissan Qashqai J10, first series. F…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.499
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |