Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on the Nissan Sunny?

Model: Nissan Sunny N17 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: V-belt

See other generations:
Video tutorial

To replace the serpentine belt on the Nissan Sunny, you need to lift the car to access the belt from the bottom of the engine compartment: it will be located near the front right wheel, to the left of the engine block. You can remove it by loosening the center nut on the tensioner pulley, which will reduce the tension and allow you to slide off the old belt: this way, you can install a new one, securing the center nut on the tensioner pulley again and checking that everything works correctly.


Updated on 13 June 2026 by ScegliAuto


Related tutorials

How to Replace the Serpentine Belt on a Nissan Sunny?
How to Replace the Serpentine Belt on a Nissan Sunny?
Nissan Sunny (2011-2020 / N17) To replace the serpentine belt on a Nissan Sunny, open the hood to access the belt from the bottom of the engine compartment. The belt is located nea…
How to Replace the Water Pump on the Nissan Sunny
How to Replace the Water Pump on the Nissan Sunny
Nissan Sunny (2011-2020 / N17) To replace the water pump on the Nissan Sunny, open the hood to access the components inside the engine bay. This will allow you to locate the water …
How to Replace the Cabin Filter on a Nissan Sunny
How to Replace the Cabin Filter on a Nissan Sunny
Nissan Sunny (2011-2020 / N17) To replace the cabin filter on a Nissan Sunny, access the bottom of the glove compartment from the front passenger side. Once the left side panel of …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos