Do it yourself
| ||||
|
Nissan Qashqai - Video tutorial
Model: Nissan Qashqai
J12
- Years 2021-2024 As we can see in this tutorial, replacing the Nissan Qashqai ceiling light bulbs is a very simple operation. To do this, we will need a flat-tipped screwdriver or preferably a plastic spatula, so as not to leave any marks. We start by removing the key, then pry along the perimeter of the white part of the ceiling light and unhook it from the support. Once this is done, we grab the faulty bulb, pull it towards us and remove it from its housing. We avoid touching the glass of the replacement directly with bare hands, otherwise any residues could cause it to overheat.
Posted on 24 September 2022 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.041
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |