Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tail Lights on a Nissan Sunny?

Model: Nissan Sunny N17 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Tail light

See other generations:
Video tutorial

In this tutorial, you will see how to remove the tail lights on a Nissan Sunny, a very simple task to perform if you need to replace a bulb or the entire light assembly. First, ensure the key is not in the ignition and open the trunk.

Then, by removing the indicated bolt and various clips, take off the inner cover located at the back of the light to be removed. Next, unscrew the mounting screws of the light, separate it from the body, and disconnect the power connector.

To access the bulbs, you will need to open the cover located at the back.


Updated on 15 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Suspension on a Nissan Sunny
How to Replace the Rear Suspension on a Nissan Sunny
Nissan Sunny (2011-2020 / N17) Follow the main steps to remove and replace the rear suspension on a Nissan Sunny. First, open the trunk and remove the suspension nut located at the…
How to Replace the Suspension Arm of the Nissan Sunny
How to Replace the Suspension Arm of the Nissan Sunny
Nissan Sunny (2011-2020 / N17) Today, let's go through the steps to remove and replace the suspension arm of the Nissan Sunny, following the instructions below. First, lift the veh…
Replace the Cabin Air Filter on the Nissan Sunny
Replace the Cabin Air Filter on the Nissan Sunny
Nissan Sunny (2011-2020 / N17) Let's briefly review the main steps to remove and replace the cabin air filter on the Nissan Sunny, following the instructions below. First, get insi…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos