Do it yourself
Frequently asked questions about cars and motorcycles

Fuse Box Diagram for the Nissan Qashqai

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Fuse box

See other generations:
Video tutorial

This short video tutorial shows the exact location of the fuse boxes and all their respective operating diagrams with amperages, names, and layouts for a second-generation Nissan Qashqai, produced from 2013 to 2017. The first fuse boxes are located on both sides of the dashboard, behind a plastic panel that needs to be removed.

The other fuse boxes are found in the engine compartment on the right, and to access them, you must first remove the air intake tube from the filter box as shown in the tutorial.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2014-2022 / J11) Today's guide will illustrate the diagram and positioning of the fuses in the Nissan Qashqai. First, get inside the vehicle and start by opening and …
Nissan Qashqai (2021-2026 / J12) The internal fuse box of the Nissan Qashqai is located inside the cabin and is very easy to access. To find it, open the driver's side door and look …
Nissan Qashqai (2006-2014 / J10) This guide shows the location and diagram of the fuse boxes on a Nissan Qashqai J10, first generation. First, locate the internal fuse box, which is …

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2006-2014 - Where is the windshield washer pump fuse located in the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - Where is the Nissan Qashqai horn fuse located? Read answer

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos