Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Headlight Bulb on a Nissan Tiida Versa

Model: Nissan Tiida Versa C12 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

If you need to replace a burnt-out headlight bulb on this vehicle, follow the instructions in this description and refer to the images in the video. After lifting the hood, locate the headlight assembly with the burnt bulb and disconnect the electrical connector behind the bulb.

Remove the plastic cover to access the bulb holder, which can be extracted by releasing the steel clip first. Take the new bulb, being careful not to touch the glass with your fingers, place it in the socket, and reattach the clip.

Finally, replace the plastic cover and reconnect the electrical connector.


Updated on 10 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlight Bulb on the Nissan Tiida Versa
How to Replace the Rear Headlight Bulb on the Nissan Tiida Versa
Nissan Tiida Versa (2004-2011 / C11) Today, we will see in this brief and simple guide how to remove and replace the bulbs in the rear headlight of the Nissan Tiida Versa, following the …
How to Remove the Car Radio in the Nissan Tiida Versa
How to Remove the Car Radio in the Nissan Tiida Versa
Nissan Tiida Versa (2004-2011 / C11) In today's video, you will see how to remove the car radio in the Nissan Tiida Versa. First, gather a flathead screwdriver and a Phillips screwdriver…
How to Remove the Radio from the Nissan Tiida Versa
How to Remove the Radio from the Nissan Tiida Versa
Nissan Tiida Versa (2004-2011 / C11) Today, you will learn how to remove the factory radio from the Nissan Tiida Versa by following the instructions below. First, get inside the vehicle …

Other guides you may be interested in

How to Activate the Cruise Control on the Toyota Yaris?

To activate the cruise control on the Toyota Yaris, start the engine by turning the key in the ignition switch. Once the engine is running, press the accelerator pedal until you reach the desired speed. Then, press the button on the right side of the steering wheel to activate the cruise control. You can also adjust the cruising speed by lifting the switch to increase it and lowering the switch to decrease it.

Watch the video!


by ScegliAuto

More videos