|
Do it yourself
| |||
| ||||
How to eliminate an unusual noise when steering your Qashqai.
Model: Nissan Qashqai
J11
- Years 2014-2022
Have you ever heard an annoying "click" when steering your Nissan Qashqai? Let's see how to resolve it: check the steering column between the pedals. Remove the cover using a screwdriver or a coin to take out the plastic screws holding the cover in place, then you will need a 16 mm socket to ensure it is properly tightened. Next, look inside for a plastic cap, which may have dried out over time. Lubricate it with spray grease (not silicone) to resolve the noise. To help the spray grease flow better, use the tip of the screwdriver. Now open the bonnet and check another potential noise source; the top of the shock absorber, where the nut may become loose; check both the right and left sides. Get underneath the car from under the front wheel. There is a bolt securing the car from underneath the front wishbone, but while you are there, inspect all the bolts underneath the subframe of the car. Finally, check the steering box; in the video, we see the gaiter, but this is the last thing to address if the previous checks do not resolve the issue.
Updated on 13 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Nissan Qashqai
(2014-2022 /
J11)
If you have heard an annoying creaking noise when driving over bumps and dips in your Nissan Qashqai, this guide is for you: remove the wheel and loc…
Nissan Qashqai
(2014-2022 /
J11)
In this video, we will see the steps to remove the rear number plate and holder on a Nissan Qashqai J11, second series, and how to eliminate the vibr…
Nissan Qashqai
(2014-2022 /
J11)
If you have ever experienced a strange vibration in your Nissan Qashqai coming from the floor under the driver's feet, but could not identify it, the…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.065
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |