Do it yourself
| ||||
|
Nissan X Trail - Video tutorial
Model: Nissan X Trail
T30, MK 1
- Years 2001-2006 In order to replace the timing chain, you must first loosen the screws that fix the valve cover and those that fix the right front wheel, so that both components can be removed from their housing. Once the wheel has been removed, the internal cover of the relative wheel arch must also be removed, in order to access the chain tensioner located in its rear part: by loosening the screws that fix it, the chain tension can be reduced itself, which will be removed from its housing and replaced with a new one.
Posted on 8 June 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |