Do it yourself
Frequently asked questions about cars and motorcycles

How to Install Puddle Lights Without Modifying the Electrical System

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Checks and maintenance

In this video, learn how to install adhesive LED door lights without making any modifications to the electrical system. Rechargeable LEDs can be found with a common mobile phone charger, and magnets to allow activation when the door opens, available on AliExpress, code 1005004561563534, priced at £2.90 for the pair (+£2.50 shipping): installation is very simple as it is done with double-sided adhesive cut to size, included in the package (for both the light unit and the magnet). The only precaution is to take two precise measurements to position the light unit and magnet in the same location, ensuring the magnet is not visible; the video will assist with this.

Updated on 19 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Qashqai (2014-2022 / J11) In this short and simple guide, we will go through the steps to install the front scuff plate on the Nissan Qashqai, following the instructions below…
Nissan Qashqai (2014-2022 / J11) Let's see how to easily install a wireless charging pad on a Nissan Qashqai. To install this pad, you need to make a small hole in the armrest to pas…
Nissan Qashqai (2014-2022 / J11) In this video, you will see how to fit the protective sill strips on the threshold of the Nissan Qashqai J11 version. We can recommend a better produ…

    Frequently Asked Questions

    • Qashqai 2006-2014 - Where is the oil dipstick on the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - Why does the cruise control of the Nissan Qashqai not work? Read answer
    • Qashqai 2006-2014 - Why are the Nissan Qashqai steering wheel buttons not working? Read answer
    • Qashqai 2006-2014 - Where is the Nissan Qashqai indicator relay located? Read answer
    • Qashqai 2014-2022 - How do you disable Start and Stop in a Nissan Qashqai? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos