Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit a Leather Steering Wheel Cover on a Nissan Qashqai

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Steering wheel

See other generations:
Video tutorial

In this video, you will see how to fit a leather steering wheel cover for the Nissan Qashqai. We recommend one available on Amazon with code B07TXF8QPW for £32.00 with free delivery, but you can find cheaper options, perhaps on AliExpress.

Always check that the model is compatible with your car. The YouTuber fitted the cover over the existing steering wheel without removing the original cover, allowing the option to revert back. In the comments of the original video, they mentioned having to remove and refit the steering wheel cover using double-sided tape, which helped the piece adhere much better.

The entire job took about two hours.


Updated on 20 July 2026 by ScegliAuto


Related tutorials

Removing the Gear Knob from a Nissan Qashqai
Removing the Gear Knob from a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) As with any maintenance operation on a vehicle, you must place your Nissan Qashqai on a flat surface or on a ramp to work safely and stably. First, r…
Removing the Steering Wheel Airbag from the Nissan Qashqai
Removing the Steering Wheel Airbag from the Nissan Qashqai
Nissan Qashqai (2021-2026 / J12) This guide briefly outlines the instructions to remove and replace the steering wheel airbag of the Nissan Qashqai. First, get in the vehicle and sta…
Removing the Steering Wheel and Airbag on a Nissan Qashqai J10
Removing the Steering Wheel and Airbag on a Nissan Qashqai J10
Nissan Qashqai (2006-2014 / J10) Today, you will learn how to remove the steering wheel and its airbag on a Nissan Qashqai J10, first series, by following the instructions below. Fir…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos