Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the spiral contact of the steering wheel in a 2012 Nissan Qashqai?

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Steering wheel

See other generations:
Video tutorial

Here's how to proceed. First of all, disconnect the battery and wait 10 minutes to avoid problems with the airbag.

Remove the airbag by unscrewing the screws located behind the steering wheel and carefully disconnect the connectors. Next, loosen the central nut of the steering wheel without completely removing it and, with a few taps, remove the steering wheel.

Now you have access to the spiral contact: disconnect the connectors, unscrew the fixing screws, and remove it. Install the new contact by aligning it correctly; it usually has a centering block. Reconnect everything and reassemble the steering wheel and airbag.

Finally, reconnect the battery and perform a test to check the horn, controls, and indicators. If everything works, you have done a great job. Alternatively, you can contact a specialized workshop.


Posted on 19 September 2025 by ScegliAuto


Related tutorials

How do you replace the steering wheel of the Nissan Qashqai?
How do you replace the steering wheel of the Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) In order to replace the steering wheel of the Nissan Qashqai, you need to loosen the screws that secure the airbag located at its center: these screw…
How to Replace the Timing Chain on the Nissan Qashqai?
How to Replace the Timing Chain on the Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) To replace the timing chain on the Nissan Qashqai, lift the vehicle with a jack or ramp, ensuring the front right wheel is off the ground: loosen the…
Removing the Steering Wheel Airbag from the Nissan Qashqai
Removing the Steering Wheel Airbag from the Nissan Qashqai
Nissan Qashqai (2021-2026 / J12) This guide briefly outlines the instructions to remove and replace the steering wheel airbag of the Nissan Qashqai. First, get in the vehicle and sta…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos