Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the steering wheel of the Nissan Qashqai?

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Steering wheel

See other generations:
Video tutorial

In order to replace the steering wheel of the Nissan Qashqai, you need to loosen the screws that secure the airbag located at its center: these screws are located at the back of the steering wheel. Once they have been loosened, you can proceed by releasing the airbag from its housing, disconnecting the connector underneath.

At this point, you can loosen the central nut of the steering wheel so that it can be removed from its seat and replaced with a new one: once it is secured, you can reconnect and secure the airbag again.


Posted on 26 April 2025 by ScegliAuto


Related tutorials

Removing the Steering Wheel Airbag from the Nissan Qashqai
Removing the Steering Wheel Airbag from the Nissan Qashqai
Nissan Qashqai (2021-2026 / J12) This guide briefly outlines the instructions to remove and replace the steering wheel airbag of the Nissan Qashqai. First, get in the vehicle and sta…
Removing the Steering Wheel and Airbag on a Nissan Qashqai J10
Removing the Steering Wheel and Airbag on a Nissan Qashqai J10
Nissan Qashqai (2006-2014 / J10) Today, you will learn how to remove the steering wheel and its airbag on a Nissan Qashqai J10, first series, by following the instructions below. Fir…
How to Remove the Airbag from the Steering Wheel of a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) How do you remove the airbag from the steering wheel of a Nissan Qashqai? Let's see in this video how to proceed with the disassembly. Before removin…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos