Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : Disassembly of the steering wheel and airbag on the Nissan Qashqai J10

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Steering wheel
Operation: Disassembly of the steering wheel and airbag on the Nissan Qashqai J10

Today we will see how to remove the steering wheel and its airbag on the Nissan Qashqai J10, first series, following the instructions below. First of all we get inside the car and start by unscrewing the two fixing screws that we find on the rear part of the steering wheel; after which we remove our airbag by disconnecting the electrical connector. At this point we can unscrew the central bolt of the steering wheel, using a socket wrench with extension; we gently extract the steering wheel from its seat, in order to replace it. Reverse the procedure for reassembly!


Posted on 19 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2006-2014 - How do you apply the leather on the steering wheel of the Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - The steering wheel controls of my Nissan Qashqai are not working, what can I do? Read Answer
    • Qashqai 2006-2014 - Why does the horn not work on Nissan Qashqai? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos