Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Gear Knob from a Nissan Qashqai

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Shift knob

See other generations:
Video tutorial

As with any maintenance operation on a vehicle, you must place your Nissan Qashqai on a flat surface or on a ramp to work safely and stably. First, remove the upper trim of the gear knob (the part that shows the gear positions).

To do this, press behind the knob and simultaneously pull upwards. Now, extract the clip found at the top of the lever and remove the knob.

If you also want to remove the leather gaiter, you need to move the two side panels and both elements, front and rear, that surround the base of the leather gaiter. This way, you can remove the base along with the leather gaiter.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

Removing the Gear Knob on Nissan Qashqai
Removing the Gear Knob on Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) In this short video tutorial, learn how to remove the gear knob from a Nissan Qashqai: the operation is quite simple and does not require any special…
Replacement of the gear lever knob of the Nissan Qashqai.
Replacement of the gear lever knob of the Nissan Qashqai.
Nissan Qashqai (2006-2014 / J10) Today's instructions will show us the process of disassembling and replacing the gear shift knob of the Nissan Qashqai, following these simple and qu…
How to Replace the Gear Knob on the Nissan Qashqai J11
How to Replace the Gear Knob on the Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) The steps to complete the replacement of the gear knob on your Nissan Qashqai J11 are very simple, and you just need to read the following guide to a…

    Frequently Asked Questions

    • Qashqai 2014-2022 - How to remove the gear knob in the Nissan Qashqai? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos