Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Qashqai
  6. : How to replace brake pads on the Nissan Qashqai.

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Brake pads
Operation: How to replace brake pads on the Nissan Qashqai.

In this video, we will see how to replace the brake pads of our Nissan Qashqai J10. To replace them, first, we need to lift the car or the brake wheel that needs to be replaced. After that, using a 21 wheel key, unscrew all the tire bolts and remove the tire. Once removed, use a flathead screwdriver to open the brake caliper by inserting the screwdriver into the appropriate holes. At this point, use a 17 socket wrench and a 14 wrench to unscrew the pad retaining bolts. Once the bolts are unscrewed, remove the pad block. Once removed, remove the pads with the help of a flathead screwdriver. At this point, insert the new pads. It is recommended to clean the pad block with a brush and brake cleaner. Now, reposition the pad block and tighten the bolts with the previously used tools to unscrew them. Once tightened correctly, reposition the wheel and tighten the bolts. At this point, the procedure is complete.


Posted on 31 August 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Qashqai 2021-2028 - What is the cost of brake pads for the Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - How much does it cost to replace brake pads on Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - What to do if the brake pad warning light comes on on Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - Why does the yellow brake light on the Nissan Qashqai come on? Read Answer
    • Qashqai 2014-2022 - How much does it cost to replace the brake pads on the Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - How long do the front brake pads last on a Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - How much does it cost to replace front brake pads on Nissan Qashqai? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos