Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake pads of the Nissan Qashqai

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Brake pads

Let's see the instructions that will allow us to disassemble and replace the front brake pads of the Nissan Qashqai. First of all, lift the car and start unscrewing the wheel bolts to remove it; then unscrew the screws of the front brake caliper to remove it from the disc, as shown in the video. At this point, remove the old brake pads, levering on the caliper piston to retract it; clean the caliper from the residual dirt and install the new original brake pads, reassembling the braking system and finally the wheel.

Posted on 15 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Brake Pads on a Nissan Qashqai 1
Replacing the Rear Brake Pads on a Nissan Qashqai 1
Nissan Qashqai (2006-2014 / J10) Today, this tutorial video will show you how to remove and replace the rear brake pads and discs on the first generation Nissan Qashqai J10. First, l…
How do you replace the front brake pads of the Nissan Qashqai?
How do you replace the front brake pads of the Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) It will be possible to replace the front brake pads of the Nissan Qashqai by lifting the car, so that the corresponding front wheel is not in contact…
How do you replace the front brake pads on a Nissan Qashqai?
How do you replace the front brake pads on a Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) It will be possible to replace the front brake pads of the Nissan Qashqai by lifting the car with a jack, so that the corresponding front wheel is no…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos