Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : Replacing the rear brake pads of the Nissan Qashqai 1

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Brake pads
Operation: Replacing the rear brake pads of the Nissan Qashqai 1

Today we will see, in this tutorial video, how to remove and replace the rear brake pads and discs of the Nissan Qashqai J10, first generation. First we lift the car and remove the front wheel; after which we unscrew the fixing screws of the rear brake caliper, using a socket wrench of 14 mm, as shown in the video. At this point we remove the brake caliper and extract the old pads contained inside; we remove and replace, if necessary, also the rear brake disc. Now let's push the piston back to fit the new brake pads!


Posted on 6 August 2022 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2021-2028 - What is the cost of brake pads for the Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - How much does it cost to replace brake pads on Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - What to do if the brake pad warning light comes on on Nissan Qashqai? Read Answer
    • Qashqai 2014-2022 - Why does the yellow brake light on the Nissan Qashqai come on? Read Answer
    • Qashqai 2014-2022 - How much does it cost to replace the brake pads on the Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - How long do the front brake pads last on a Nissan Qashqai? Read Answer
    • Qashqai 2006-2014 - How much does it cost to replace front brake pads on Nissan Qashqai? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos