Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Nissan Grand Livina

Model: Nissan Livinia Grand Livinia MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight bulb

See other generations:
Video tutorial

Today, let's go through the steps to remove and replace the headlight bulbs on a Nissan Grand Livina. First, open the hood of the vehicle and start by removing the plastic protective cap. Then, pull the bulb out of the headlight assembly along with its electrical connector, as shown in the video.

At this point, remove and replace the low beam bulb with a new one of the correct type and with the same base. Next, instructions will be provided on how to replace the other bulbs in the headlight!


Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Nissan Livina
How to Replace the Headlight Bulb on a Nissan Livina
Nissan Livinia Grand Livinia (2013-2020 / MK 2) To replace the headlight bulb on a Nissan Livina, open the hood to access the screws that secure the headlight corresponding to the bulb you need to …
How to Change a Bulb in the Rear Light Assembly of a Nissan Grand Livina
How to Change a Bulb in the Rear Light Assembly of a Nissan Grand Livina
Nissan Livinia Grand Livinia (2013-2020 / MK 2) Changing a bulb in the rear light assembly of a Nissan Grand Livina is really the simplest thing in the world. Just open the trunk to quickly access …
How to Replace the Key Battery on the Nissan Livinia Grand Livinia
How to Replace the Key Battery on the Nissan Livinia Grand Livinia
Nissan Livinia Grand Livinia (2013-2020 / MK 2) If you need to replace the remote key battery on this vehicle, the instructions below outline the operational methods and necessary steps for the rep…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos