Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Headlight on a Nissan Altima

Model: Nissan Altima L33 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight

See other generations:
Video tutorial

This guide provides the main instructions for removing and replacing the headlight on a Nissan Altima in simple steps. First, open the hood and start unscrewing all the mounting screws located at the top of the front bumper; then gently detach the bumper at the junction of the headlight assembly to access and unscrew the mounting screws on the sides, as shown in the video.

At this point, disconnect the electrical connector of the bulbs, removing and replacing the headlight assembly or the bulbs with new ones; then reassemble everything!


Updated on 5 September 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight on a Nissan Altima
How to Replace the Headlight on a Nissan Altima
Nissan Altima (2007-2012 / L32) To remove the headlight on a Nissan Altima, open the hood to access the rivets securing the headlight at the top. Once these rivets are removed, you …
How to Replace the Rear Headlight Bulb on a Nissan Altima
How to Replace the Rear Headlight Bulb on a Nissan Altima
Nissan Altima (2013-2018 / L33) To replace the rear headlight bulb on a Nissan Altima, open the trunk to access the cargo area. On the side corresponding to the headlight with the b…
How to Replace the Headlight Bulbs on a Nissan Altima?
How to Replace the Headlight Bulbs on a Nissan Altima?
Nissan Altima (2013-2018 / L33) Replacing the headlight bulbs on a Nissan Altima is a very simple and quick operation. Let's see how to proceed in this tutorial. Since the workspace…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos