Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Altima
    4. : How to replace the headlight bulbs in Nissan Altima?

Nissan Altima - Video tutorial

Model: Nissan Altima L33 - Years 2013-2018
Part: Headlight bulb
Operation: How to replace the headlight bulbs in Nissan Altima?

Replacing the headlight bulbs in the Nissan Altima is a very simple and fast operation, let's see how to proceed in this tutorial. As the working space available in the engine compartment is limited, you will need to access the rear of the headlight from the wheel arch. To do this, we turn the wheel of the side where we are going to intervene completely inwards, then remove the plastic clip and move the panel just enough to access the lighthouse. At this point, we can extract the bulb holder by turning it slightly counterclockwise, replace the bulb and repeat the operation for the opposite headlight.


Posted on 14 April 2024 by ScegliAuto



How to replace the rear light bulbs in Nissan Altima?
Nissan Altima (2007-2012 / L32) Replacing the rear light bulbs in the Nissan Altima is a very simple operation, let's see how to proceed in this tutorial. First you need to move the
How to disassemble and replace the front headlight of the Nissan Altima.
Nissan Altima (2013-2018 / L33) In this guide, we will see the main instructions on how to disassemble and replace the front headlight of the Nissan Altima, in simple steps. First,
Replace the rear light bulbs of the Nissan Altima
Nissan Altima (2007-2012 / L32) Let's see the guide on how to remove and replace the rear light and its light bulbs of the Nissan Altima. First we open the tailgate of the trunk and

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos