Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the 2022 Nissan Altima

Model: Nissan Altima L34 - Years 2018-2026
Part: Headlight bulb

In the following mini guide, we will describe all the steps you need to follow to replace the front headlight bulb of your Nissan Altima (year 2022) on your own. First, purchase a bulb, then turn off the car completely and turn the steering wheel to the right. At this point, go outside and reach the front wheel well on the same side as the bulb to be replaced. Unscrew the screw with a 10mm wrench and then remove the protective cover. Finally, locate the bulb holder and replace it with the new bulb.

Posted on 10 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the 2015 Nissan Altima
How to replace the front headlight bulb of the 2015 Nissan Altima
Nissan Altima (2013-2018 / L33) To replace the headlight bulb of your 2015 Nissan Altima on your own, you must first carefully read the entire procedure described in our new guide a…
How to Replace the Front Headlight Bulb on a Nissan Altima?
How to Replace the Front Headlight Bulb on a Nissan Altima?
Nissan Altima (2007-2012 / L32) To replace the front headlight bulb on a Nissan Altima, loosen the screws securing the inner fender cover corresponding to the bulb to be replaced. T…
How to replace the taillight bulb of the Nissan Altima
How to replace the taillight bulb of the Nissan Altima
Nissan Altima (2018-2026 / L34) If the rear taillight bulb of your Nissan Altima (latest model) has suddenly stopped working and you want to find out how to replace it quickly and c…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos