Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Nissan Primastar

Model: Nissan Primastar MK 1 - Years 2001-2016
Part: Service warning light

Reset the oil light on a Nissan Primastar only after replacing the oil in the tank and changing the oil filter. Resetting the light without performing the necessary replacements may cause engine and ECU damage. To reset the oil light, do the following: - Insert the key into the ignition; - Press the accelerator pedal fully; - Turn on the instrument panel; - Press the brake pedal three times; - Release both pedals; - Turn off the instrument panel; Complete the steps by turning on the panel to check that the reset was successful.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Reset the Service Light on Nissan Primastar
Reset the Service Light on Nissan Primastar
Nissan Primastar (2001-2016 / MK 1) This brief guide will show you the procedure to reset the service light on your Nissan Primastar. This operation is very simple and quick to perform,…
How do you reset the service light on the Nissan Primastar 2?
How do you reset the service light on the Nissan Primastar 2?
Nissan Primastar (2001-2016 / MK 1) In the attached video, we can see how to change the engine oil and oil filter of the Nissan Primastar 2. This is done after the Service light comes o…
Resetting the service light indicator on the Nissan Primastar
Resetting the service light indicator on the Nissan Primastar
Nissan Primastar (2001-2016 / MK 1) Below we will see the instructions that will allow us to reset the maintenance service light for the oil change of the Nissan Primastar. First of all…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos