Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light indicator on the Nissan Primastar

Model: Nissan Primastar MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

Below we will see the instructions that will allow us to reset the maintenance service light for the oil change of the Nissan Primastar. First of all, we get into the car and start pressing and holding down the accelerator pedal and the button at the end of the right lever; then we turn on the instrument panel and turn it off after a few seconds, as shown in the video.

At this point, we release the accelerator pedal and start the engine, verifying the actual reset of the service reminder on the instrument panel!


Posted on 6 November 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Nissan Primastar?
How to Reset the Service Light on the Nissan Primastar?
Nissan Primastar (2021-2026 / X82) You can completely clear the Service light on the Nissan Primastar by inserting the ignition key into the corresponding slot and turning on the ignit…
How to Reset the Service Light on the Nissan Primastar Van?
How to Reset the Service Light on the Nissan Primastar Van?
Nissan Primastar (2001-2016 / MK 1) As shown in this tutorial, resetting the service light on the Nissan Primastar van is a very simple and quick operation. Before proceeding, ensure yo…
How to reset the service light on the Nissan Primastar van?
How to reset the service light on the Nissan Primastar van?
Nissan Primastar (2001-2016 / MK 1) In this tutorial we can see how to reset the service in the Nissan Primastar van, an extremely simple and quick operation, to be carried out only onc…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos