Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to disassemble the door panel of the Nissan Qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Door panel
Operation: How to disassemble the door panel of the Nissan Qashqai

To disassemble the door panel of the Nissan Qashqai, follow the basic steps outlined below. Keep in mind that the exact details may vary slightly depending on the year and version of the vehicle, so consult the owner's manual or refer to specific instructions for your model, if available. Remove the door handle: Find the screws or clips securing the inner door handle. They may be covered by decorative covers or trim. Remove the screws or clips with a screwdriver or clip removal tool, then gently detach the handle from the door. Remove window and control switches: If your Qashqai has window and electric mirror control switches integrated into the door panel, disconnect the electrical cables from the buttons or lift the fasteners to remove them. Remove the mounting screws: Look for the mounting screws around the perimeter of the door panel. They may be covered by trim or decorative covers. Remove the screws with an appropriate screwdriver. Remove trim or decorative covers: If there are trim or decorative covers attached to the door panel, such as around the handle or armrest, carefully remove them. They may be held in place by hidden clips or hooks. Use a clip removal tool: Once all screws and trim have been removed, use a clip removal tool to lift the door panel from the bottom and sides. The mounting clips hold the panel in place. Work carefully around the perimeter of the panel to unlock all the clips. Disconnect connectors and cables: As you lift the door panel, be mindful of connectors and electrical cables that may be connected to devices inside the panel. Disconnect the necessary connectors and electrical cables to completely remove the panel from the door.


Posted on 19 February 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos