Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tie Rod Ends on the Nissan NP200 Suspension

Model: Nissan Nissan Various
Part: Checks and maintenance

This video is currently unavailable

In this video, you will learn how to replace the tie rod ends on the suspension of a Nissan NP200: first, remove the left front wheel; once removed, you can clearly see the tie rod, and now turn the entire assembly to work more comfortably. You need to remove the 16 mm nut that is prominently visible.

Then, remove the rack from the steering by turning it 19 times. Place a container underneath to avoid spilling fluids into the environment.

Now, refit the new part by turning it in the opposite direction for the same 19 turns, and replace the nut, tightening the 16 mm nut securely. You can find this part on eBay with the code 325663086598 for £18.40 each plus £8.17 for shipping.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port on the Nissan NP200
Where to Find the OBD Port on the Nissan NP200
Nissan Nissan Various To locate the OBD port in your Nissan NP200, follow these steps. First, get inside the vehicle and reach the passenger seat. Then, open the glove com…
Where Are the Fuses Located on the Nissan NV400?
Where Are the Fuses Located on the Nissan NV400?
Nissan Nissan Various The fuses on the Nissan NV400 are located inside the designated fuse boxes installed in the vehicle: this type of vehicle has three fuse boxes. The f…
How to Remove the Dashboard from the Nissan Terrano
How to Remove the Dashboard from the Nissan Terrano
Nissan Nissan Various This guide provides useful instructions for removing the entire dashboard from the Nissan Terrano. First, get inside the vehicle and begin by removin…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos