Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper from the Nissan Qashqai J10

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Rear bumper

See other generations:
Video tutorial

In this video, you will see how to remove the rear bumper from the Nissan Qashqai J10. Start by opening the boot and removing the visible screws on the tailgate's edge. Then, remove the plastic clips inside the rear wheel arch, and take off the plastic trim covering the wheel arch using a 10 mm spanner; perform this operation on both sides.

The bumper is held in place only by these side clips, with no additional screws or bolts securing it at the bottom, so once these clips are removed, you can slide it off easily.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

How do you remove the rear bumper of the Nissan Qashqai?
How do you remove the rear bumper of the Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) In order to remove the rear bumper of the Nissan Qashqai, you need to open the rear hatch so that you can locate the screws that secure the bumper fr…
How to Remove the Front Bumper of a Nissan Qashqai?
How to Remove the Front Bumper of a Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) To remove the front bumper of the Nissan Qashqai, open the bonnet to access the screws securing the bumper from the top. Once these screws and rivets…
How to Replace the Rear Brake Pads on a Nissan Qashqai
How to Replace the Rear Brake Pads on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Before starting, lift the rear of your Nissan Qashqai. Begin by removing the rear wheel, loosening the fixing bolts. Next, unscrew and remove the bol…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos