Do it yourself
Frequently asked questions about cars and motorcycles

Model: Niu Nqi
Part: Brake pads

Today we will see the instructions for removing and replacing the rear brake pads on the Niu NQi scooter. First, place it on the centre stand and start by removing the rear wheel arch by unscrewing the fastening screws; next, unscrew the screws of the brake caliper, removing it from the disc as shown in the video. At this point, press the caliper piston to remove the old brake pads; clean the caliper of any residual dirt, and install the new original brake pads. Reassemble the braking system and finally the rear wheel arch!

Posted on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Burgman 650 Today, discover the necessary guide to remove and replace the front and rear brake pads on the Suzuki Burgman 650 scooter. First, place the scooter o…
Rs 660 In this guide, we will discover the instructions on how to disassemble and replace the rear brake pads on an Aprilia RS 660. First, place the motorcy…
Speedfight 2 In today's tutorial video, see how to remove and replace the front and rear brake pads on the second series Peugeot Speedfight scooter. First, start …

How to Change the Speed Unit on the Piaggio Mp3

If the speed displayed on your Piaggio Mp3 is in a unit of measurement different from your preference, simply follow this mini guide to change it independently. First, start this procedure with the bike completely off. Then, press and hold the "Mode" button on the right knob for about three seconds and turn on the display. Once done, press the "Mode" button again to switch between units (from Km/h to Mph or vice versa). Finally, hold down "Set" to save the changes.

Watch the video!


by ScegliAuto

More videos