Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Console to Replace the LED in an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Push button

How do you remove the centre console to replace the illumination LEDs in an Opel Mokka? Watch this video carefully for the disassembly process. Using a plastic or metal trim tool, pry off the plastic trim surrounding the gear knob, then remove the plastic frame around the car's radio. Unscrew the securing pins located at the bottom of the climate control above the glove compartment using a socket wrench. Remove the button panel and replace the LEDs inside. Finally, reassemble everything in reverse order.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Bulbs/LEDs in the Ceiling Light of an Opel Mokka
How to Replace the Bulbs/LEDs in the Ceiling Light of an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Learn how to replace the bulbs/LEDs in the ceiling light of an Opel Mokka: use a screwdriver or plastic lever to pry between the ceiling light cover …
How to Replace the Number Plate Bulbs or LEDs on Opel Mokka
How to Replace the Number Plate Bulbs or LEDs on Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Learn how to replace the number plate light bulbs or LEDs on an Opel Mokka. Start by opening the boot lid, then use a lever to detach the plastic lig…
How to remove the central dashboard cover of the Opel Mokka
How to remove the central dashboard cover of the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) This guide provides instructions for removing and replacing the side cover of the central dashboard of the Opel Mokka. First, get inside the vehicle …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos