How and When to Replace the Timing Chain of the Opel Adam

Model: Vauxhall Adam MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Timing belt

This video is currently unavailable

Today, we will cover the key information needed for the removal and replacement of the timing chain on the Opel Adam; generally, the timing chain should be replaced on this type of engine every 124,000 miles, but a visual inspection is recommended before reaching this mileage.

First, raise the vehicle and begin by removing the front right wheel; then remove the wheel arch liner and disconnect the serpentine belt, followed by removing the crankshaft pulley, as shown in the video.

Now access the timing chain, check its condition, and replace it if necessary!

Updated on 26 October 2026 by ScegliAuto

Other guides you may be interested in

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

Wheel - Maintenance and repair on other vehicles

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!

by ScegliAuto

How and When to Replace the Timing Chain of the Opel Adam

Related tutorials

Other guides you may be interested in

How to enter the radio code in the Opel Zafira?

More videos