Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Centre Console of the Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

See other generations:
Video tutorial

The main steps in this guide will show you how to dismantle the centre console of the Opel Insignia. First, get inside the vehicle and start removing the plastic cover of the cigarette lighter; also remove the cover of the gear lever, as shown in the video.

At this point, detach the side cover of the centre console to remove it, disconnecting all the electrical connectors found underneath; replace the centre console with a new one if necessary, reconnecting everything and refitting all the plastic covers of the dashboard!


Updated on 28 October 2026 by ScegliAuto


Related tutorials

How to Set the Time and Date on an Opel Insignia
How to Set the Time and Date on an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) In this video, you will see how to set the time and date on an Opel Insignia. Use the "configuration" button to enter the menu, and for convenience, …
How to Replace the Gear Knob on an Opel Insignia?
How to Replace the Gear Knob on an Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) In this tutorial, see how to replace the automatic gear knob on an Opel Insignia, a very simple and quick operation. Start by unclipping the base of …
How do you change the language of the on-board computer of the Opel Insignia?
How do you change the language of the on-board computer of the Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) To change the language of the on-board computer of the Opel Insignia, you need to turn on the instrument panel by inserting the ignition key into the…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos