Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to recalibrate the TPMS sensors of the Opel Astra

Model: Vauxhall Astra Astra K - Years 2015-2022
Part:

Following these brief steps, we will see how to recalibrate the TPMS sensors and consequently reset the tire pressure warning on the Opel Astra; before performing the reset, it is necessary for all four tires to be at the correct pressure. In order to recalibrate the TPMS sensors, it is necessary to use the appropriate programming software; approach the tool to the sensor to perform the calibration, as shown in the video. Once the pressures are recorded, get into the vehicle and check the correct operating pressures and reset the TPMS warning.

Posted on 23 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Learn and Reset the Tyre Pressure Sensors on an Opel Astra
How to Learn and Reset the Tyre Pressure Sensors on an Opel Astra
Vauxhall Astra (2015-2022 / Astra K) In this guide, we will see the main instructions that will allow you to learn and reset the tyre pressure warning light on an Opel Astra; before reca…
How to reset the tire pressure warning light on the Opel Astra.
How to reset the tire pressure warning light on the Opel Astra.
Vauxhall Astra (2021-2026 / Astra L) Below we will see the information related to resetting the tire pressure warning of the Opel Astra; before resetting the TPMS sensors, it is necessar…
How to disable the parking sensors of the Opel Astra.
How to disable the parking sensors of the Opel Astra.
Vauxhall Astra (2009-2016 / Astra J) Today we will show you how to disable the parking sensors on an Opel Astra model J. Let's turn on the vehicle's instrument panel and press the TAV bu…

    Frequently Asked Questions

    • Astra 2009-2016 - How do you reset the tire pressure warning light on the Opel Astra 2016? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos