Do it yourself
Frequently asked questions about cars and motorcycles

Problems with the distribution chain on the 1.5 TDi engine YH01 Peugeot Citroen Opel.

Model: Vauxhall Grandland X MK 1 - Years 2017-2024
Part: Timing belt

In this video we can see the issues of an engine produced by Peugeot, Citroen and Opel: it is the 1.5 TDi YH01 which in this case is mounted on an Opel Grandaland-X. The main problem is the premature breakage of the timing chain that controls the camshafts. The cause is the defective timing chain tensioner, often made of plastic, which wears out or breaks, leading to the chain snapping. The consequence is an engine out of phase, with serious damage to pistons, valves, camshafts, which in some cases can lead to a total engine replacement. The symptoms to watch out for are: an abnormal noise in the valve cover, an increase in noise when cold or during acceleration, and of course the warning lights coming on: the official solution from the car manufacturers is a modified repair kit, which includes a new camshaft carrier housing, with the chain pre-assembled, a hydraulic timing chain tensioner, rockers and new gaskets. If we hear strange noises, let's stop immediately and call a tow truck; in the workshop we should specifically ask for the modified kit, because the old original parts are subject to the same defect.

Posted on 9 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Grandland X (2017-2024 / MK 1) The following instructions will allow you to remove and replace the timing belt on an Opel Grandland X 1.2. First, open the engine cover and begin by…
Vauxhall Grandland X (2017-2024 / MK 1) It will be possible to replace the timing belt of the Opel Grandland X by lifting the car with a jack or a lift, ensuring that the front right wheel …
Vauxhall Grandland X (2017-2024 / MK 1) In this tutorial, you will see how to reset the onboard computer in the Opel Grandland X, a very simple and quick operation, for example, as a troubl…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos