|
Do it yourself
| |||
| ||||
How to replace the internal fan of the Opel Zafira B
Model: Vauxhall Zafira
Zafira B, A05, MK 2
- Years 2005-2011
Let's see how to replace the fan on an Opel Zafira B: first of all, disconnect the battery and wait fifteen minutes before working near the driver's compartment, to allow the airbag to deactivate; empty the glove compartment and release the compartment door: there are 2/3 screws on the top inside the drawer and another pair on the bottom. They must be removed. Then remove the compartment from the pins to release it, lowering it slightly. Now we see the air conditioning unit box, and inside it the squirrel cage fan. Disconnect the electrical connector; the motor is held by 3 screws, unscrew them and gently pull out the motor. The new one can be found on Amazon with the code B0FD21R31Z at a price of 152.34 with free delivery. But used ones can be found online for less than half the price. When installing the new motor, apply some silicone lubricant on the plastic guides to avoid annoying squeaks in the future. Insert the impeller, mount the motor, reconnect the connector, and reassemble the glove compartment. You can reconnect the battery, the job is done.
Posted on 30 August 2025 by ScegliAuto
Video tutorial
Related tutorials
Vauxhall Zafira
(2005-2011 /
Zafira B, A05, MK 2)
In this video, we will see the main instructions for removing the fan and radiator from an Opel Zafira B. First, open and lift the bonnet and disconn…
Vauxhall Zafira
(2011-2019 /
Zafira C, MK 3)
In today's video, you will see the main steps to remove and replace the cabin fan on the Opel Zafira C, third generation. First, get inside the vehic…
Vauxhall Zafira
(2011-2019 /
Zafira C, MK 3)
If the radiator fan on your Opel Zafira has suddenly stopped working, first check the status of the relevant fuses, the location of which is indicate…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.532
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |