Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Metal Tow Bar on an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Checks and maintenance

Here’s how to install a metal tow bar on an Opel Mokka. After removing the exhaust pipe from the vehicle: place the black metal bar into the slots on the car's chassis, then insert the (metal) bars of the bumper into the metalwork. Tighten the securing bolts into the threads of the chassis using a socket wrench (ensure the bolts are tight). Pass the power wiring through the newly installed frame (use plastic ties). Refit the exhaust pipe and all associated parts. Carefully check the correct assembly of the previously installed parts.

Updated on 6 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Key Remote Battery on an Opel Mokka
How to Replace the Key Remote Battery on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) To replace the key remote battery on an Opel Mokka, follow these steps: take the remote and press the button to release the metal key. Once the metal…
How to replace the headlight bulb of the Opel Mokka.
How to replace the headlight bulb of the Opel Mokka.
Vauxhall Mokka (2012-2019 / Mokka A) Let's briefly review the instructions on how to disassemble and replace the headlight bulb of the Opel Mokka. First, let's open the vehicle's hood an…
How to Remove the Front Headlamp Bulbs on an Opel Mokka
How to Remove the Front Headlamp Bulbs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Here’s how to remove and replace the front headlamp bulbs on an Opel Mokka: open the front bonnet by pulling the lever located at the bottom right of…

    Frequently Asked Questions

    • Mokka 2012-2019 - What probable issues have been identified in the past with the Opel Mokka 1.4 turbo? Read answer
    • Mokka 2020-2027 - Have there been any issues found with the Opel Mokka 1.2 turbo? Read answer
    • Mokka 2012-2019 - What do codes 82 and 89 indicate on the Opel Mokka? Read answer
    • Mokka 2020-2027 - How much does it cost to put an LPG system on an Opel Mokka? Read answer
    • Mokka 2012-2019 - What do the codes 82 and 89 of the Opel Mokka mean? Read answer

How to Remove the Engine Oil Filter of the Peugeot 308

How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located (engine compartment under the ventilation pipe). Drain the used oil from under the engine sump. Remove the worn oil filter and position a new one, ensuring it adheres well around the walls of the housing. Finally, refit the ventilation pipe and top up the engine oil. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos