Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Tyre Pressure Warning Light on the Opel Mokka

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part:

In this guide, you will find instructions on how to reset the tyre pressure warning light on the Opel Mokka; before resetting the TPMS sensors, ensure all four tyres are at the correct operating pressure. Then, get in the vehicle and turn on the ignition; next, navigate to the onboard computer settings using the controls on the left lever until you reach the tyre pressure option. At this point, press the button at the end to confirm and execute the TPMS reset, confirming with OK to reset the TPMS sensors.

Posted on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Warning Light on the Opel Mokka
Resetting the Tyre Pressure Warning Light on the Opel Mokka
Vauxhall Mokka (2020-2026 / Mokka B) Quickly and easily reset the tyre pressure monitoring system (TPMS) warning light on the Opel Mokka. Before resetting, ensure all four tyres are at t…
Reset Tyre Pressure Light on an Opel Mokka
Reset Tyre Pressure Light on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this video tutorial, you will learn how to reset the tyre pressure light on an Opel Mokka by following these simple instructions. Before performin…
How to Reset the Tyre Pressure Warning Light on the Opel Mokka
How to Reset the Tyre Pressure Warning Light on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) .. This guide shows how to reset the tyre pressure warning light on the Opel Mokka. The first step is to place the car on a flat.. …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos