Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Interior Light on an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Instrument panel light

To replace the damaged bulb in the interior light of an Opel Mokka: use a screwdriver to pry between the interior light and the headlining panel (without breaking anything), pull the interior light out from the panel and disconnect the power connector. Replace the damaged bulb/LED with a new one (same size and voltage). Refit the interior light into its housing (push the transparent plastic with your hands until the clips lock into the side plastic). Test the correct operation of the bulb fitted in the interior light after installation.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Bulbs/LEDs in the Ceiling Light of an Opel Mokka
How to Replace the Bulbs/LEDs in the Ceiling Light of an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Learn how to replace the bulbs/LEDs in the ceiling light of an Opel Mokka: use a screwdriver or plastic lever to pry between the ceiling light cover …
Replacing Number Plate Lights on Opel Mokka X
Replacing Number Plate Lights on Opel Mokka X
Vauxhall Mokka (2012-2019 / Mokka A) In this simple and quick video tutorial, replace the number plate bulbs on your Opel Mokka X. First, remove the plastic light cover: use a pointed to…
How to change the bulb of the vanity mirror on the sun visor of the Opel Mokka
How to change the bulb of the vanity mirror on the sun visor of the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this video we can see how to change the light bulb located next to the vanity mirror, on the passenger's sun visor, of the Opel Mokka. Originally …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos