Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the sliding door of the Opel Vivaro

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Car door

In this brief guide, we will see the instructions on how to adjust the sliding side door of the Opel Vivaro. First, let's open the sliding door and check the condition of the guides and hinges; if they are damaged, we should replace the parts with new ones. To make the adjustment, it is necessary to loosen the hinge fastening screws while positioning the sliding door; then we tighten the screws again. Let's make sure that all the sliding guides are clean to ensure the smooth operation of the door.

Posted on 23 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the time in the Opel Vivaro van?
How to adjust the time in the Opel Vivaro van?
Vauxhall Vivaro (2014-2019 / MK 2) In this tutorial we can see how to adjust the time in the Opel Vivaro van, an extremely simple and quick operation, to be carried out for example aft…
How to adjust the gearbox of the 2015 Opel Vivaro
How to adjust the gearbox of the 2015 Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Today we will show you how to adjust the gear shift of the 2015 Opel Vivaro. To adjust the gear shift, you need to use a 10 mm wrench. Lift the plast…
How to adjust the time on the Opel Vivaro?
How to adjust the time on the Opel Vivaro?
Vauxhall Vivaro (2001-2014 / MK 1) Today we will discover the procedure that will allow us to adjust the time on the Opel Vivaro, following the instructions below. First, we get on boa…

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos