Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Shock Absorbers on the Opel/Vauxhall Combo Van

Model: Vauxhall Combo Combo C, MK 3 - Years 2001-2011
Part: Shocks

Let's see how to replace the rear shock absorbers on an Opel/Vauxhall Combo. First, engage the handbrake, block the front wheels with chocks, loosen the nuts of the rear wheels, then lift the rear end and place axle stands under the solid points of the chassis. Remove the rear wheels. Position a second jack under the rear axle and raise it until it slightly supports the weight. This is just to relieve the tension on the suspension. Observe the orientation of the shock absorber to reinstall the new one in the same position. First, loosen the upper bolt, then the lower one, and finally completely remove the upper bolt, extracting the shock absorber. Refit the new shock absorber, which you may have found on motointegrator.it, brand SACHS with code 505859 at a price of £29.28 each + £9.95 for shipping. Position it respecting the correct orientation, hand-tighten the bolt, first the upper and then the lower, and then tighten them, but not yet to the final torque. Remove the support jack from the axle, reassemble the wheel, and then lower the vehicle. Tighten the wheel nuts to the torque specified by the manufacturer, and do the same with the shock absorbers.

Posted on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Combo (2001-2011 / Combo C, MK 3) In this tutorial we can see how to replace the battery in the Opel Combo van, a very simple and quick operation. First of all, make sure that the key…
Vauxhall Combo (2001-2011 / Combo C, MK 3) As shown in this tutorial, resetting the service on the Opel Combo van is a very simple and quick operation. Before proceeding, ensure you have compl…
Vauxhall Combo (2012-2018 / Combo D, MK 4) In this tutorial, see how to replace the diesel filter in an Opel Combo van, a very simple and quick operation. Before proceeding, ensure the engine …

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos