Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Monitoring System on the Opel Corsa F

Model: Vauxhall Corsa Corsa F - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

Here’s how to reset the tyre pressure warning light (TPMS) on an Opel Corsa F: turn on the instrument panel and navigate through the display menu using the controls on the steering wheel or dashboard. Look for and select the 'tyres' option, which is found under 'vehicle information'. Before proceeding, ensure that all tyres are inflated to the correct pressure (indicated on the door pillar or in the manual).

Select 'low pressure initialisation' (or it may just say 'reset'). Confirm the operation by pressing 'ok' or the confirmation button. The low pressure message should disappear from the screen.

On newer models, the TPMS is indirect (using ABS sensors) and resets automatically after driving for a few minutes at speeds over 18.6 mph.


Posted on 20 September 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure sensor on Opel Corsa E
How to reset the tire pressure sensor on Opel Corsa E
Vauxhall Corsa (2014-2019 / Corsa E) Open the driver's side door and turn on the instrument panel of your Opel Corsa E. From the main menu, select "Vehicle" and then "Safety". Find the o…
Resetting the PMS on an Opel Corsa E
Resetting the PMS on an Opel Corsa E
Vauxhall Corsa (2014-2019 / Corsa E) This guide shows what to do if the tyre pressure on an Opel Corsa E drops below the set threshold, indicated by an orange warning light, allowing you…
How to reset the TPMS light on an Opel Corsa
Vauxhall Corsa (2019-2026 / Corsa F) To reset the TPMS light on an Opel Corsa, use the touchscreen of the infotainment system. Turn on the instrument panel and from the central display, …

Other guides you may be interested in

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos