Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Wheel Bearing on an Opel Corsa

Model: Vauxhall Corsa - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Bearing

See other generations:
Video tutorial

To replace the front wheel bearing on an Opel Corsa, lift the front of the vehicle and remove the affected wheel. Unscrew the central nut of the hub and remove the brake caliper, then take off the brake disc.

Disconnect the ABS sensor if present and unscrew the bolts that secure the hub to the suspension strut. At this point, remove the wheel hub containing the bearing.

Install the new hub with the integrated bearing in the same position and tighten the securing bolts. Refit the brake disc, caliper, and hub nut. Finally, reattach the wheel, lower the vehicle, and check that the wheel spins correctly without any unusual noises.


Posted on 18 October 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bearing on the Opel Corsa D?
How to Remove the Rear Bearing on the Opel Corsa D?
Vauxhall Corsa (2006-2014 / Corsa D) In this video tutorial, you will learn how to remove and replace the rear wheel bearing, or hub, on the Opel Corsa D, by following these simple steps…
How to replace the bearing of the Opel Corsa D
How to replace the bearing of the Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) Let's see how to replace a bearing on the Opel Corsa D: remember that it is a rather complex operation, because a poorly mounted bearing can cause th…
How to change the crankshaft oil seal on the Opel Corsa D 1.4 16V
How to change the crankshaft oil seal on the Opel Corsa D 1.4 16V
Vauxhall Corsa (2006-2014 / Corsa D) In today's video, you will see how to remove and replace the crankshaft oil seal on the Opel Corsa D 1.4 16V, following these simple steps. First, li…

How to Remove the Front Bumper of the Renault Trafic?

To remove the front bumper of the Renault Trafic, use a tool to pry off the grille at the top: once this grille is removed, you can loosen the screws at the bottom to detach the front headlights. These must now be extracted by disconnecting the underlying connectors: this will allow you to loosen the additional screws that secure the front bumper and remove it completely. At this point, you can insert the new replacement part and check that everything functions correctly.

Watch the video!


by ScegliAuto

More videos