Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the crankshaft oil seal on the Opel Corsa D 1.4 16V

Model: Vauxhall Corsa Corsa D - Years 2006-2014

In today's video, you will see how to remove and replace the crankshaft oil seal on the Opel Corsa D 1.4 16V, following these simple steps. First, lift the vehicle and start by removing the front right wheel; then remove the wheel arch liner by unscrewing the screws. Next, unscrew the bolts of the crankshaft pulley, then remove the V-belt; now unscrew the central bolt of the bearing to access the oil seal. Simply remove it and replace it with the new one, following the video tutorial to the end!

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Crankshaft Oil Seal on the Opel Corsa 1.2
How to Replace the Crankshaft Oil Seal on the Opel Corsa 1.2
Vauxhall Corsa (2000-2006 / Corsa C) In this tutorial, learn the main steps to remove and replace the crankshaft oil seal on the petrol Opel Corsa 1.2. First, lift the vehicle and remove…
How to replace the water pump of the Opel Corsa 1.4 16V
How to replace the water pump of the Opel Corsa 1.4 16V
Vauxhall Corsa (2014-2019 / Corsa E) In this guide we will see the main instructions that will allow us to disassemble and replace the water pump of the Opel Corsa 1.4 16V. First, lift t…
Guide to replacing the cylinder head gasket of the Opel Corsa 1.0
Guide to replacing the cylinder head gasket of the Opel Corsa 1.0
Vauxhall Corsa (1993-2000 / Corsa B) Today we will see the main steps that will allow us to disassemble and replace the cylinder head gasket of the Opel Corsa 1.0 gasoline engine. First …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos