Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the drive belt on the Opel Corsa D

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: V-belt

In this video we will see how to replace the service belt on the Opel Corsa version D: we will need to lift the vehicle, as we will need to access from the right wheel, removing the wheel and the fender. We will then find the service belt in a fairly accessible position to be removed easily. We loosen the tensioner and remove the belt to be replaced. When replacing the belt, it is usually recommended to also replace the tensioner, so we advise to purchase a complete kit. We then replace the parts and slide the belt paying attention to the direction of movement: we refer to the figure for the correct assembly in the gears, and always keep the tensioner roller firmly in place. We put back the fender, remount the wheel and lower the vehicle to the ground. Job done.

Posted on 15 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Auxiliary Belt on the Opel Corsa
How to Replace the Auxiliary Belt on the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) To replace the auxiliary belt on this vehicle, follow the instructions provided in this description and also refer to the video. After opening the bo…
How to Replace the Alternator on an Opel Corsa?
How to Replace the Alternator on an Opel Corsa?
Vauxhall Corsa (2000-2006 / Corsa C) To remove the faulty alternator, first remove the auxiliary belt. To do this, loosen the tensioner so that it can be easily removed. Now unscrew the …
How to Replace the Alternator on an Opel Corsa C 1.7 DTI
How to Replace the Alternator on an Opel Corsa C 1.7 DTI
Vauxhall Corsa (2000-2006 / Corsa C) Today, you will see the instructions that will allow you to remove and replace the alternator on an Opel Corsa C with a 1.7 DTI engine. First, open t…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos