Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : How to replace the service belt of the Opel Corsa

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: V-belt
Operation: How to replace the service belt of the Opel Corsa

If we want to proceed to replace the service belt on this car we can follow the instructions given in this description and take a look at the video as well. After opening the bonnet it will be necessary to remove the box containing the air filter. Then lift the car and remove the right wheel, then remove the panel inside the mudguard. At this point we will have access to the belts and its belt tensioner. Then proceed to loosen the belt tensioner and in this way we can remove the V-belt that we are going to replace. Finally, proceed to reassemble all the disassembled components backwards.


Posted on 28 May 2024 by ScegliAuto



How to change the alternator belt of the Opel Corsa 1.3
Vauxhall Corsa (2006-2014 / Corsa D) Let's see in this short and simple guide the steps that will allow us to remove and replace the alternator belt of the Opel Corsa 1.3. First we lift
How do you replace the timing belt of the Opel Corsa?
Vauxhall Corsa (1993-2000 / Corsa B) In order to replace the timing belt of the Opel Corsa, you need to open the hood and access the components located on the left side of the engine blo
When and how to replace the timing belt of the Opel Corsa D series
Vauxhall Corsa (2006-2014 / Corsa D) The guide shows how to replace the timing belt on the Opel Corsa D series. The replacement interval is 180000 km or every 5 years. To carry out the o

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos