Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the water pump of the Opel Corsa 1.4 16V

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Pump

In this guide we will see the main instructions that will allow us to disassemble and replace the water pump of the Opel Corsa 1.4 16V. First, lift the car and start by removing the front right wheel; remove the wheel arch and disconnect the V-belt, also removing the crankshaft pulley. At this point, remove the engine support and the distribution cover, then proceed with the disassembly of the water pump and its kit; if necessary, also replace the timing belt, installing the original one, following the video tutorial until the end!

Posted on 8 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the water pump on an Opel Corsa
Replacement of the water pump on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Today we will see how to replace the water pump on an Opel Corsa D 1.2 16v. Let's start the operation by removing the air filter box and disconnectin…
How to replace the water pump of the Opel Corsa 1.2
How to replace the water pump of the Opel Corsa 1.2
Vauxhall Corsa (2006-2014 / Corsa D) Today's main steps will show us the process of disassembling and replacing the water pump of the Opel Corsa 1.2. First, we open the hood of the car a…
Replacing the Water Pump on an Opel Corsa C
Replacing the Water Pump on an Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) In this video tutorial, learn how to remove and replace the water pump on an Opel Corsa C. First, open and lift the bonnet; to remove the water pump,…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos