Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Water Pump on Opel Corsa

Model: Vauxhall Corsa Corsa C - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Pump

See other generations:
Video tutorial

Replace the water pump on the Opel Corsa. Remove the pump from inside the engine bay. Lift the front bonnet of the car to access the pump.

Disconnect the alternator belt and remove the covers to access the water pump. Start by loosening the securing bolts of the water pump with a socket spanner as shown in the video.

Once the part is removed from its seat, disconnect the feed connectors and take it out. Install the new water pump in the engine bay after cleaning any dirt and debris from the mounting area. Secure all belts and refit all covers.


Updated on 29 March 2026 by ScegliAuto


Related tutorials

How to Replace the Water Pump on the Opel Corsa 1.2
How to Replace the Water Pump on the Opel Corsa 1.2
Vauxhall Corsa (2006-2014 / Corsa D) Today's main steps will show you the process of removing and replacing the water pump on the Opel Corsa 1.2. First, open the bonnet of the vehicle an…
Replacing the Water Pump on an Opel Corsa
Replacing the Water Pump on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Today, let's see how to replace the water pump on an Opel Corsa D 1.2 16v. Start the operation by removing the air filter box and disconnecting the v…
Replacing the Water Pump on an Opel Corsa C
Replacing the Water Pump on an Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) In this video tutorial, learn how to remove and replace the water pump on an Opel Corsa C. First, open and lift the bonnet; to remove the water pump,…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos