|
Do it yourself
| |||
| ||||
How to change the headlight bulbs on an Opel/Vauxhall Corsa E
Model: Vauxhall Corsa
- Years:
2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
To change the headlight bulbs on an Opel Corsa E, open the bonnet. At the back of the headlight, there are three rubber covers (one for dipped beam, one for main beam, one for position light). Rotate them a quarter turn to remove. Before refitting, clean them and apply some silicone or WD-40 to the rubber to keep it flexible and waterproof. Dipped beam (H7): press the retaining tab at the bottom of the bulb holder and disconnect the connector. Remove the bulb. Do not touch the glass with your fingers. Insert the new H7 aligning the retaining tab with the socket in the reflector. Reconnect the connector, replace the cover, and rotate it a quarter turn to secure it. Main beam (H7): same system, with the retaining tab at the bottom. Position light (W5W): disconnect the two connectors by hand, then use a screwdriver to push out the bulb holder. Remove the W5W bulb by pulling it out. Insert the new one (do not touch the glass), replace the bulb holder, and reconnect the connectors.
Posted on 1 November 2026 by ScegliAuto
Related tutorials
Vauxhall Corsa
(2000-2006 /
Corsa C)
Open the bonnet by pulling the lever located at the bottom right of the dashboard (secure it with the prop rod). Locate the inspection cap of the hea…
Vauxhall Corsa
(2006-2014 /
Corsa D)
Are the bulbs in the rear headlight of your Opel Corsa no longer working? Learn how to replace the rear headlight bulbs. Open the boot lid, then remo…
Vauxhall Corsa
(2006-2014 /
Corsa D)
In this video tutorial, you will learn how to remove the front headlamp and bulbs from an Opel Corsa D; it also shows how to detach the front bumper.…
Other guides you may be interested in
|
How to Reset the TPMS Light on the 2014 Toyota Yaris
Resetting the TPMS light, which relates to tyre pressure, is a simple and quick task that can be done independently on the 2014 Toyota Yaris. To reset the light, turn on the ignition and press the RESET button located under the dashboard on the driver's side. While holding the button down, you can access the reset function and wait a few seconds before releasing the button. Once the ignition is restarted, the light will turn off. If the light does not reset, you may need to perform the reset using a scanner and OBD port at a garage. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.071
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |