Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Headlight Bulbs on Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight bulb

See other generations:
Video tutorial

Have the front headlight bulbs blown? Let's see how to replace them. Lift the bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the prop.

Locate the plastic inspection cap of the headlight (located at the rear of the headlight) and remove it. Pull the bulb holders out of the headlight and extract the damaged bulbs using a screwdriver. Fit the new bulbs and insert the bulb holder back into the headlight housing.

Refit the inspection caps behind the headlight and close the bonnet. Test the operation of the bulbs.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

Causes and Consequences of Low Oil Pressure on an Opel Insignia Engine
Causes and Consequences of Low Oil Pressure on an Opel Insignia Engine
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) In this video, you can see the consequences of low oil pressure on the engine of an Opel Insignia 2.0 with an A20DTH engine. A small rubber seal inst…
How to Replace the Cabin Air Filter on Opel Insignia
How to Replace the Cabin Air Filter on Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) If you want to change the cabin air filter on your first-generation Opel Insignia yourself, follow the procedure in this guide. First, purchase a new…
Where is the fuel filter located on an Opel Insignia and how to access it?
Where is the fuel filter located on an Opel Insignia and how to access it?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Good morning, today you will discover where the diesel filter is located on your Opel Insignia and how to access it. The filter is located inside the…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos