Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of Exhaust Battery

Model: Vauxhall Corsa Corsa B - Years 1993-2000
Part: Battery

Open the boot and, as the first step, loosen the nut on the negative terminal and remove it from the battery, then loosen the nut on the positive terminal and detach it from the battery. Unscrew the nut located on the right side of the battery, removing the retaining plate at the bottom. Extract the battery from its housing using the designated handles. Install the new battery and secure it properly with the screw and corresponding plate. Clean the battery terminals with sandpaper or a cloth. Position the terminal on the positive post, pushing it down fully and tightening the securing nut, then repeat the same operation with the negative terminal. Do not dispose of the exhausted battery in the environment but take it to designated collection centres.

Updated on 6 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Vauxhall Corsa (2019-2026 / Corsa F) To replace the battery inside the key of your Opel Corsa F by yourself, you only need a few minutes. All you have to do is carefully read the followi…
Vauxhall Corsa (2014-2019 / Corsa E) To replace the button cell battery inside the remote control of your Opel Corsa E (year 2014-2019) just follow these simple steps. First, get yoursel…
Vauxhall Corsa (2006-2014 / Corsa D) If you own an Opel Corsa D and want to replace the key battery yourself then you just have to read this new guide of ours carefully and put the vario…

Other guides you may be interested in

How to Remove the Centre Console on a Renault Scenic

Watch this video to learn how to remove the glove compartment from the rear cover of the centre console on a Renault Scenic. Use a plastic lever to pry at the edge of the side plastics as shown in the video. Once the plastics are removed, unscrew the screws located at the sides of the centre console with a suitable screwdriver, and disconnect all the power connectors. Remove the side rests from the glove compartment. Fit the new piece onto the centre cover and proceed with the assembly of the remaining parts, working in reverse order.

Watch the video!


by ScegliAuto

More videos